Explore Workflows

https://github.com/common-workflow-language/cwltool.git

Path: cwltool/schemas/v1.0/v1.0/any-type-compat.cwl

Branch/Commit ID: aaaece1c097c3f06afa21f7ecddcc85519e2bb2b

https://github.com/common-workflow-language/cwltool.git

Path: cwltool/schemas/v1.0/v1.0/count-lines6-wf.cwl

Branch/Commit ID: 665141f319e6b23bd9924b14844f2e979f141944

https://github.com/genome/analysis-workflows.git

Path: definitions/subworkflows/varscan_pre_and_post_processing.cwl

Branch/Commit ID: b7d9ace34664d3cedb16f2512c8a6dc6debfc8ca

### Pipeline for Lexogen's QuantSeq 3' mRNA-Seq Library Prep Kit FWD for Illumina [Lexogen original documentation](https://www.lexogen.com/quantseq-3mrna-sequencing/) * Cost-saving and streamlined globin mRNA depletion during QuantSeq library preparation * Genome-wide analysis of gene expression * Cost-efficient alternative to microarrays and standard RNA-Seq * Down to 100 pg total RNA input * Applicable for low quality and FFPE samples * Single-read sequencing of up to 9,216 samples/lane * Dual indexing and Unique Molecular Identifiers (UMIs) are available ### QuantSeq 3’ mRNA-Seq Library Prep Kit FWD for Illumina The QuantSeq FWD Kit is a library preparation protocol designed to generate Illumina compatible libraries of sequences close to the 3’ end of polyadenylated RNA. QuantSeq FWD contains the Illumina Read 1 linker sequence in the second strand synthesis primer, hence NGS reads are generated towards the poly(A) tail, directly reflecting the mRNA sequence (see workflow). This version is the recommended standard for gene expression analysis. Lexogen furthermore provides a high-throughput version with optional dual indexing (i5 and i7 indices) allowing up to 9,216 samples to be multiplexed in one lane. #### Analysis of Low Input and Low Quality Samples The required input amount of total RNA is as low as 100 pg. QuantSeq is suitable to reproducibly generate libraries from low quality RNA, including FFPE samples. See Fig.1 and 2 for a comparison of two different RNA qualities (FFPE and fresh frozen cryo-block) of the same sample.  Figure 1 | Correlation of gene counts of FFPE and cryo samples.  Figure 2 | Venn diagrams of genes detected by QuantSeq at a uniform read depth of 2.5 M reads in FFPE and cryo samples with 1, 5, and 10 reads/gene thresholds. #### Mapping of Transcript End Sites By using longer reads QuantSeq FWD allows to exactly pinpoint the 3’ end of poly(A) RNA (see Fig. 3) and therefore obtain accurate information about the 3’ UTR.  Figure 3 | QuantSeq read coverage versus normalized transcript length of NGS libraries derived from FFPE-RNA (blue) and cryo-preserved RNA (red). ### Current workflow should be used only with the single-end RNA-Seq data. It performs the following steps: 1. Separates UMIes and trims adapters from input FASTQ file 2. Uses ```STAR``` to align reads from input FASTQ file according to the predefined reference indices; generates unsorted BAM file and alignment statistics file 3. Uses ```fastx_quality_stats``` to analyze input FASTQ file and generates quality statistics file 4. Uses ```samtools sort``` and generates coordinate sorted BAM(+BAI) file pair from the unsorted BAM file obtained on the step 2 (after running STAR) 5. Uses ```umi_tools dedup``` and generates final filtered sorted BAM(+BAI) file pair 6. Generates BigWig file on the base of sorted BAM file 7. Maps input FASTQ file to predefined rRNA reference indices using ```bowtie``` to define the level of rRNA contamination; exports resulted statistics to file 8. Calculates isoform expression level for the sorted BAM file and GTF/TAB annotation file using GEEP reads-counting utility; exports results to file

https://github.com/datirium/workflows.git

Path: workflows/trim-quantseq-mrnaseq-se.cwl

Branch/Commit ID: ebbf23764ede324cabc064bd50647c1f643726fa

https://github.com/common-workflow-language/cwltool.git

Path: cwltool/schemas/v1.0/v1.0/dynresreq-workflow.cwl

Branch/Commit ID: c6cced7a2e6389d2eb43342e702677ccb7c7497c

Runs RNA-Seq BioWardrobe basic analysis with strand specific pair-end data file.

https://github.com/Barski-lab/workflows.git

Path: workflows/rnaseq-pe-dutp.cwl

Branch/Commit ID: 8587882f145d3eb8e258e7bf819a94f8dd666dbf

This workflow downloads the user-selected pre-built kraken2 database from: https://benlangmead.github.io/aws-indexes/k2 ### __Inputs__ Select a pre-built Kraken2 database to download and use for metagenomic classification: - Available options comprised of various combinations of RefSeq reference genome sets: - [Viral (0.5 GB)](https://genome-idx.s3.amazonaws.com/kraken/k2_viral_20221209.tar.gz), all refseq viral genomes - [MinusB (8.7 GB)](https://genome-idx.s3.amazonaws.com/kraken/k2_minusb_20221209.tar.gz), standard minus bacteria (archaea, viral, plasmid, human1, UniVec_Core) - [PlusPFP-16 (15.0 GB)](https://genome-idx.s3.amazonaws.com/kraken/k2_pluspfp_16gb_20221209.tar.gz), standard (archaea, bacteria, viral, plasmid, human1, UniVec_Core) + (protozoa, fungi & plant) capped at 16 GB (shrunk via random kmer downselect) - [EuPathDB46 (34.1 GB)](https://genome-idx.s3.amazonaws.com/kraken/k2_eupathdb48_20201113.tar.gz), eukaryotic pathogen genomes with contaminants removed (https://veupathdb.org/veupathdb/app) - [16S_gg_13_5 (73 MB)](https://genome-idx.s3.amazonaws.com/kraken/16S_Greengenes13.5_20200326.tgz), Greengenes 16S rRNA database ([release 13.5](https://greengenes.secondgenome.com/?prefix=downloads/greengenes_database/gg_13_5/), 20200326)\n - [16S_silva_138 (112 MB)](https://genome-idx.s3.amazonaws.com/kraken/16S_Silva138_20200326.tgz), SILVA 16S rRNA database ([release 138.1](https://www.arb-silva.de/documentation/release-1381/), 20200827) ### __Outputs__ - k2db, an upstream database used by kraken2 classification tool ### __Data Analysis Steps__ 1. download selected pre-built kraken2 database. 2. make available as upstream source for kraken2 metagenomic taxonomic classification. ### __References__ - Wood, D.E., Lu, J. & Langmead, B. Improved metagenomic analysis with Kraken 2. Genome Biol 20, 257 (2019). https://doi.org/10.1186/s13059-019-1891-0

https://github.com/datirium/workflows.git

Path: workflows/kraken2-databases.cwl

Branch/Commit ID: 7030da528559c7106d156284e50ff0ecedab0c4e

https://github.com/genome/analysis-workflows.git

Path: definitions/pipelines/bisulfite.cwl

Branch/Commit ID: 051074fce4afd9732ef34db9dd43d3a1d8e979d6

https://github.com/PMCC-BioinformaticsCore/janis-pipelines.git

Path: janis_pipelines/wgs_somatic/cwl/tools/samtools_mpileup_subpipeline.cwl

Branch/Commit ID: 5ba65e4781f03a74a845b7cd40bbf4c2ae3a9844

https://github.com/uc-cdis/genomel_pipelines.git

Path: genomel/cwl/workflows/harmonization/alignment_bwa_mem_no_trim.cwl

Branch/Commit ID: 7eb6b9f75db20866611a3bc55bee28746e84c1b6